SOLAR POWERED WIRELESS PERIMETER / DRIVEWAY ALERT & ALARM SYSTEM – SUPPLIED AND FITTED
900M – 900-1B(100)-KT1 SOLAR POWERED PERIMETER / DRIVEWAY/ PROTECTION BEAM KIT
Solar Powered Wireless Perimeter Alarm System which has a 100 metre Detection Range between the beams & 900 metre Transmission Range (between the Receiver & Detection Beams), very easy and fast to install, ideal for protecting Perimeters, Entrances, large Remote Buildings.
These unique Perimeter Beams are very easy to install as they have a built in Red Glow Light (for easy lining up) which illuminates for just one hour after switching the beams on, after the hour this light will automatically switch off adding to your security.
The beams have two detecting beams (60 mm apart) which need to be activated at the same time before the an alarm signal is sent back to the receiver, this reduces false alarms from small animals, leaves, debris etc.
A Wireless Four Channel Receiver, has an adjustable 12v DC output, 4 x Dry Relay Outputs, Adjustable Volume Control, options for a Reminder Beep and Exit Delay and has the ability to learn up to 32 sets of Beams into each channel (giving an amazing maximum number of beam sets of 128).
1 x Set of Beams
1 x Receiver & Plug in Transformer
1 x Set of Brackets & Screws
1 x Set of Manuals
Size: 160 (W) x 105 (H) x 35 (D) mm
Power Supply: 15v DC 1amp (plug in transformer)
ON/OFF Button: Yes
Adjustable Volume Control: Yes
Max sets of Beams per Channel: 32
Output Voltage: 12 – 12v DC
Output Voltage Duration: 2 seconds to 10 minutes
Built in Chimes: Yes (one per channel)
Reminder Bleep: Yes (if programmed)
Exit Delay: Yes 5 minutes (if programmed)
Frequency: 434.6 MHz
Standby Current: 20 mA
Alarm Current: 180 mA
Relay Rating: 24v DC or 120v AC (2 amp)
Size: 340 (H) x 123 (W) x 45 (D) mm
Power Supply: Re-chargeable AA Batteries
Mounting Methods: Wall or Pole
Detection Range: 100 metres
Transmission Range: 900 metres (line of sight)